Hail Damage Roof Repair in Weatherford, TX
Our roofers photograph the slopes they walk and call the hail damage functional or cosmetic before anyone decides between repair and replacement.
Hail here comes big enough to bruise shingles and leave the roof looking untouched from below.
What hail damage roof repair in Weatherford, TX involves
Hail does its damage to the layer nobody can see. A hit fractures the fiberglass mat under the granules while the shingle above keeps shedding water for a while, which makes a hail roof hard to judge from a driveway.
So the work opens with a count. Slopes, vents and flashing runs get photographed, and each mark gets called functional or cosmetic, because that is what an insurer pays on.
Start from the county's most recent confirmed event. On the night of April 19 and 20, 2025, an NWS survey confirmed an EF-1 about five miles west-northwest of town, with peak winds estimated at 110 mph. An earlier severe thunderstorm brought quarter-size hail and winds the National Weather Service put down to straight-line damage rather than a tornado: copper paneling was torn off Weatherford's city hall roof, and 12 residents of two apartment buildings were displaced. Both nights are dated in the wind and storm record.
Photographs of the planes walked
Shot close and wide slope by slope, the clean-looking planes included, since a carrier works off the images.
Test squares chalked out
A ten-by-ten square marked on each slope and the strikes inside it counted, so the damage arrives as a number.
Functional against cosmetic
A fractured mat is functional damage. A scuff on a ridge cap is not, and calling them the same thing is how claims fall apart.
The soft metal counted too
Vents, valley metal, drip edge and chimney caps hold a dent permanently, and they are replaced where impact went through.
Shingles replaced in kind
Damaged tabs come out and go back in matching profile and weight, whether that is a handful on one slope or the whole plane.
The write-up and the terms
You keep the list of what was replaced, and the workmanship terms come from the roofer in writing.
The marks hail leaves that you can see, and the ones you cannot
The first four are checkable from the yard. The last two are why somebody still has to get up there.
Screens, mailboxes, grill lids
Torn screens and fresh light marks on painted metal date the storm, because oxidation gets knocked off on impact.
A drift under the downspout
Coarse black sand piling up where a downspout empties means the surface layer has already started leaving the roof.
Dents in the soft metal
Gutter aprons, valley metal and vent hoods record a strike that shingles hide. Aluminum starts denting around three-quarter-inch hail.
The condenser as a gauge
The outdoor unit's fins bend at about the hail size that bruises a shingle, which makes it a rough gauge from the ground.
What a bruise feels like
A bruise is a fracture with no hole in it. Firm thumb pressure finds a soft spot where the surface still looks whole.
Scatter, which no yard check reaches
Hail arrives at an angle. One slope can be finished while the plane behind it came through fine.
How hail damage repair works in Weatherford when a claim is involved
The claim stays yours the whole way. What a roofer adds is a documented file and a second pair of eyes on the slope during the adjuster visit.
The file gets built
Slopes documented and dated, ideally in the first weeks while the marks are still fresh.
You open the claim
The homeowner calls the carrier, because the policy is the homeowner's and nobody else can file on it.
The adjuster visit
Our roofers go up for the adjuster meeting alongside you, so the same slopes and the same marks get looked at together. Arrange that timing directly with the roofer.
Work to the agreed list
Check the finished work against the approved estimate item for item. Anything the estimate missed can go back to the carrier priced and measured.
What a hail-rated shingle roof runs
Figured on 26 squares of finished roof surface (about 2,600 sq ft), the planning size behind this math and no measurement of any particular house. Yours could sit either side of it.
Impact resistance is a rating rather than a style. Class 4 is the top step of the UL 2218 steel-ball test, and an architectural or a designer shingle can carry it, so it is a separate axis from how the roof looks. As a planning range, architectural asphalt runs $450 to $690 a square installed and the Class 4 version of the same profile runs $560 to $850. Texas carriers are widely reported to offer a premium discount for an impact-rated roof, which is worth putting to your own insurer before you choose, since the paperwork usually has to name the exact product installed.
$560 to $850 · per square for Class 4 impact-rated shingles, installed
Planning ranges only. Your roof sets the real number.
What people ask after a hail day
Size, timing, coverage, and whether a dent is worth a claim at all. The federal storm record for Parker County does a lot of the work in the answers below.
Get a hail inspection on your Weatherford roof
Describe the damage and give the date of the storm if you have it. Our roofers photograph the slopes walked and call each mark before any repair is priced. A claim you decide not to file still leaves you with a roof that has been documented.